Expert Answers about Weekend Warrior

• How To Determine The Correct Landing Gear Replacement For A 2006 Weekend Warrior LE 3105
• Manufacturers do not provide the part numbers for the landing gears they install on their products so this will require you to do some measuring before we can find the correct replacement. The correct way to find an exact replacement landing gear for a trailer is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram). For example, if your frame clamps are 20-1/4 inches the Ultra Fab part # UF17-943010 would be...
  view full answer...


• Correct E-Z Flex Triple Axle Suspension Kit for 6,000 lb Axles
• The correct E-Z Flex Triple Suspension System Kit for you will depend on the length of your current equalizers as well as your axle spacing. Since you have 6,000 lb axles I recommend first taking a look at the E-Z Flex System # K71-656-00, which is for 5-5/8" equalizers with 33" axle spacing on center. If your triple axle trailer has 7-3/4" equalizers and 35 inch axle spacing you would need E-Z Flex System # K71-657-00, although generally this is for 8,000 lb axles.
  view full answer...


• Replacement Bearings for a 2007 Weekend Warrior SuperLite FS2500
• I really wish I knew exactly what size bearings your trailer has but trailer manufacturers do not provide us with this information. However, if the Electric Trailer Brake Kit part # AKEBRK-7-SA that you purchased is correct then the most likely hub/drum to pair with these brakes is the Trailer Hub and Drum Assembly part # AKHD-655-6-K which uses a 25580 inner and a 15123 outer bearing. In order to be certain this is the correct hub/drum for you, you can either pull the hubs you have now...
  view full answer...


• Recommended Replacement For A Dometic G10-3E RV Water Heater
• I recommend the Furrion RV Tankless Water Heater 60,000 BTU # FR98SR. This unit features a heating capacity of 13,000 - 60,000 Btu, well above that of your Dometic G10-3E. To put it in perspective your current water heater produces approximately 20 gallons of hot water per hour, whereas the # FR98SR will produce approximately 144 gallons of hot water per hour. It has similar dimensions at 12-5/8" L x 12-13/16" W x 19-3/16" D so you'll just need to make some slight alterations to your cutout...
  view full answer...